TRUMPF LASERCELL 1000 |
|
 |
|
Everything the laser can do |
|
 |
 |
TRUMPF LASERCELL 1000 |
|
| |
| Category |
3D Laser material processing machine |
| Product |
TRUMPF LASERCELL 1000 |
| Application fields |
Cutting, welding, surface treatment |
| Laser |
TruFlow lasers from 2000 watts to 12000 watts |
This machine is specifically designed to process a particular workpiece or a family of functionally identical parts. It stands out for its small, compact design coupled with good accessibility.
Mature machine technology is incomplete without a powerful and simple programming system. Besides Teaching, offline programming is also possible with TruTops Cell 800. TRUMPF supports linkage to other 3D programming systems as well. |
Technical data
| Machine working range |
| X axis (standard worktable optional) |
1000 mm |
| Y axis |
1500 mm |
| Z axis |
750 mm |
| C axis (NC axis) |
n x 360° |
| B axis (NC axis) |
± 120° |
| A axis (Rotary Indexing Table) |
n x 360° |
| Max. travel range |
| X axis (standrd worktable, optional) |
1000 mm |
| Y axis |
1530 mm |
| Z axis |
752 mm |
| Max. working height |
| |
750 mm |
| Max. axis speeds |
X axis (standard worktable, optional) |
50 m/min |
| Y axis |
50 m/min |
| Z axis |
30 m/min |
| C axis |
60 U/min |
| B axis (NC axis) |
120 U/min |
| A axis (Rotary Indexing Table) |
60 U/min |
| Accuracy 1 |
| Smallest programmable increment |
0,01 mm |
| Positioning accuracy Pa |
±0,1 mm |
| Repeatability |
±0,03 mm |
| Rotary Indexing Table (optional) |
| Max. outer circle diameter |
93 mm |
| Max. axial load |
300 kg |
| Diameter of rotary table with defined grid of threaded holes |
400 mm |
| Backstop |
| Travel |
100 mm |
| Cylinder force at 5 bar |
2250 N |
| TRUMPF CNC ontrol |
| Basis |
Siemens SINUMERIK 840D with NCU 573 processor |
| Hard disk storage |
more than 100 MB for NC programs |
| Floppy disk drive |
3,5" |
| platform |
PC with Windows NT |
| Colour display |
25,4 cm TFT display |
| Lasers |
| TruFlow lasers
with choice of power outputs from 2000 – 12000 watts |
| 1 |
The accuracy attainable in the part depends, amongst other things, on the type of workpiece, its pre-treatment, the sheet size and its position in the work area. In accordance with VDI/DGQ 3441, measured over a length of 1m. |
|
|
|
|
){kind=small}